Item no: 111166

Model no: EX0101-U66

Description

• Dual UTP  HDMI Extender RX(By Cat5E/Cat6 cable) with Bidirectional IR
• Range 50 meters with IR transmission
• With LED indicators and ESD protection
• UTP cable termination follows the standard of IEEE-568B
• Transmission distance reaches up to 50 meters under the video format of 1080P
• Auto-adjustment of feedback, equalization and amplify, the user does not need to care about the length of the cable
• Signaling rates up to 2.25Gbits in support of 1080P display
• Each port supports HDMI or DVI inputs
• HDCP compliant.
• With LED indicators to show the power and video signal status
• Mounting ears supplied
• Transfer bi-directional Infrared control signal together with the HDMI signal.
• EDID setting function, to ensure the best compatibility.

What's in the box

• 1 X HDMI-Over UTP (Cat5e/6) 50m with  Bidirectional Infrared - Receiver Only (EX0101-U36)

Quick found code:111179

Model no: MX0408-310

Key Features

The MX0408-310 is sufficient to manage a small home theatre system, which will deliver the HD video and audio to eight locations. (If both UTP and standard HDMI outputs are fully used, the number of total outputs would be up to 16). This matrix integrates the HDMI signal, IR control, TCP/IP and RS485 all together. HDMI via single UTP cable function is supported by this model, when using with a single UTP receiver or splitter with single UTP receiving function. A large scale HDMI network via minimum UTP cables would be built.

Important: display Receivers are required to be purchased separately in addition to the main matrixunit.

• 4x HDMI Inputs
• 8x Outputs via Dual Cat5e/6/7
• Compatible with both SD and HD resolutions
• Allows up to four HDMI audio/video devices to be independently switched to eight HDMI monitors, HDTVs, or projectors.
• The eight outputs could show the same or different source simultaneously no matter the source is HDCP or not.
• The eight outputs are all include one HDMI-A connecter and one dual RJ-45 connecter. They can output simultaneously.
• Support high definition resolutions 1080p, 1080i, 720p and other standard video formats.
• Each port supports HDMI or DVI inputs.
• With extra infrared receiver extension.
• EDID Copy
• Five switching modes: panel buttons, local IR, IR call back from remote rooms, RS485 and Ethernet.
• IR emitter for IR call back function to control the HDMI source from remote rooms.
• Rack-mountable with 1RU brackets included
• HDCP compliant
• HDMI 1.3 version 

What's in the box

• HDMI Matrix 4X 8 over cat5/cat6/cat7
• 12VDC Power Supply.
• 1 X Remote Control
• 1x IR_RX(IR receiver extension cable)
• 4x IR_TX(IR emitter cable)
• 1x RS232 to RS485 convertor
• 1x USB to UART cable
• User manual

Quick find code: 111291

Model no: CHM0404SCV3

4K/60Hz 4X4 HDMI 2.0  Matrix Switch by SINGLE UTP CAT6 ,18Gbps,POC, HDCP 2.2 YUV 4:4:4,4K*2K 444 to 70m

1)Please use EIA/TIA-568-B termination (T568B) at any time
2)Solid Shielded (STP) CAT5E/CAT6/CAT7 cable is recommended for best performance and avoid possible EMI problem.

The 4K 60HZ 18Gbps 4x4 HDMI Matrix CHM0404SCV3 offers you the high quality, high performance and reliable 4 X 4 HDMI True Matrix Switch-splitter by SINGLE UTP CAT6 that allows you to connect 4 HDMI sources to any or any combination of the 4 displays  over inexpensive, standard CAT6 cable. The 4 UTP output program can be from different HDMI sources or from the same HDMI source. Features additional HDMI output per UTP ouput for fexibility or mirroring capabilit, able to handle up to 8 displays.The Matrix technology enables you to route the HDMI input of your choice to the output your choice. For example, you can display SKY HD box on display 1 while PS4 is being showed on display 4. You are also allowed to show SKY HD box on both display 1 and display 4 simultaneously. Any 4 to any 4 matrix switching allows for maximum versatility for integrated systems. The 4K 4X4   Matrix CHM0404SCV3 True Matrix HDMI Switcher-Splitter by SINGLE UTP CAT6 eliminates the need to remove and replace the cables between the selected HDMI sources and the desired displays.  Every source is accessible at all times by any display by selecting it with push-in button, IR remote control, RS-232 control, Ethernet control and Web GUI. This device has metal case housing. It supports latest version HDMI 2.0, HDCP 2.2, 18Gbps, 4K/60Hz, YUV 4:4:4, CEC, HDR

It supports 4K2K@60Hz 4:4:4 up to 70m  over a single cat5e/cat6/cat7 cable.  Each HDMI output supports 4K2K to 1080P downscaler independently.

It has unique intelligent EDID learning function that make it more compatible.Extra infrared receiver extension, IR emitter are supplied for the control. Mounting ears supplied to fix the unit to the wall or hidden place.

4  CAT PoC receivers included 

Key Features

• distributes any of the 4 HDMI inputs to any or any combination of the 4 HDMI output displays.
• The four outputs are all include one HDMI-A output port and one CAT output port. They can output simultaneously.
• Allows independent viewing of each of the 4 HDMI source devices on 4 display device. The 4 HDMI output program can be different or the same
• HDMI 2.0b and HDCP 2.2/1.x compliant
• Video resolution up to 4K2K@60Hz (YUV 4:4:4) on all HDMI & CAT ports
• 4 HDMI inputs, 4 HDMI & CAT mirrored outputs
• HDMI ports support 18Gbps lossless uncompressed video bandwidth
• Support 4K->1080P Down Scaler for each output port
• HDR, HDR10, HDR10+, Dolby Vision, HLG are supported
• CAT output can extend the transmission distance up to 230ft/70m via a single CAT6 cable
• HDMI audio pass-through up to 7.1CH HD audio (LPCM, Dolby TrueHD and DTS-HD
  Master Audio)
• Advanced EDID management and CEC control are supported
• 12V POC on all CAT ports
• Control via front panel buttons, IR remote, RS-232, LAN and Web GUI
• Simple plug and operation

 What's in the box

• 1  X  CHM0404SCV3 4K/60Hz 4X4 HDMI 2.0  4:4:4  Matrix Switch over CAT6 70m POC
• 4 x CAT Receiver
• 1 x  Matrix IR Remote
• 1 x 12V2.5A Power Supply
• 1 x RS-232 serial Cable (1.5 meters, male to female head)
• 1 x 3-pin Phoenix Connector
• 4 x IR Blaster Cable (1.5 meters)
• 4 x IR Receiver Cable (1.5 meters)
• 10 x Mounting Ear (Matrix and Receiver)
• 1x User Manual

Quick find code: 111269

Model no: CHM0404300SCV3

WARNING!

1)Please use EIA/TIA-568-B termination (T568B) at any time
2)Solid Shielded (STP) CAT5E/CAT6/CAT7 cable is recommended for best performance and avoid possible EMI problem.

Key features

ClimaxDigital  CHM0404300SCV3 offers you the high quality, high performance and reliable 4 X 4 HDMI True Matrix Switch-splitter by SINGLE UTP CAT5E/CAT6/CAT7 that allows you to connect 4 HDMI sources to any or any combination of the 4 displays  over inexpensive, standard CAT5E/CAT6/CAT7 cable. The 4 UTP output program can be from different HDMI sources or from the same HDMI source. Features additional HDMI output per UTP ouput for fexibility or mirroring capabilit, able to handle up to 8 displays.The Matrix technology enables you to route the HDMI input of your choice to the output your choice. For example, you can display HD DVD on display 1 while PS3 is being showed on display 4. You are also allowed to show HD DVD on both display 1 and display 4 simultaneously. Any four to any four matrix switching allows for maximum versatility for integrated systems. The 4x4 True Matrix HDMI Switcher-Splitter by SINGLE UTP CAT6 eliminates the need to remove and replace the cables between the selected HDMI sources and the desired displays.  Every source is accessible at all times by any display by selecting it with push-in button, IR remote control, RS-232 control, and Ethernet control. This device has metal case housing and all HDMI ports are 24K Gold plated. It supports latest version HDMI 1.3b (backwards with all previous HDMI versions including DVI-D) and fully supports HD 1080P. It also fully supportsr DTS-HD Master Audio & Dolby TrueHD Audio. It is perfect for: PS3, HD DVD, Xbox 360 Elite, Apple TV, Virgin V+, Sky HD, Freesat HD, Blu-ray Disc, DVD, HD Camcorder, HTPC and Laptop. 

• Distributes any of the 4 HDMI inputs to any or any combination of the 4 UTP output displays over SINGLE standard Solid Shielded (STP) CAT5E/CAT6/CAT7 cable
• Supports HD resolutions up to 1080P at 60HZ, including 3D
• 4 additional HDMI outputs for flexibility or mirroring capability; allows for connection of up to 8 displays or the ability to create a larger distribution system by cascading or daisy chaining
• For even greater control and fine tuning, each receiver features a fully adjustable EQ distance range for optimizing the transmission signal
• Wideband IR pass-through (20kHz to 60 kHz)
• Support HDMI Deep Color 
• Supports 7.1 channel digital audio
• Supports default HDMI EDID and learns the EDID of displays
• The matrix master can switch every output channels to any HDMI inputs by push-in button, IR remote control, RS-232 control, and Ethernet control,Web interface control
• Allows controlling local HDMI sources such as DVD and TiVo by attached IR extender from remote receiver to matrix master
• Extends video signal up to 40m (131 feet) over single CAT.X at 1080p and likely longer with better HDMI source device (such as PS3), better grade HDMI display (such as Sony X-series HDTV), and better quality Solid Shielded (STP) CAT5E/CAT6/CAT7 cable
• Fast response time – 2~5 seconds for channel switch
• Allows independent viewing of each of the 4 HDMI source devices on 4 display device. The 4 HDMI output program can be different or the same
• Perfect for: PS3, HD DVD, Xbox 360 Elite, Apple TV, Virgin V+, Sky HD, Freesat HD, Blu-ray Disc, DVD, HD Camcorder, HTPC, Laptop
• 100% pure digital picture performance
• Supported HDTV Resolutions : 1080P/1080i/720P/576P/480P/576i/480i
• Maintains beautiful, sharp HDTV resolutions up to 1080p
• Full support for DTS-HD Master Audio & Dolby TrueHD Audio
• Each UTP output is connected to a Receiver
• Maximum Transmission Distance:  up to 40m over SINGE pieces of CAT6 cable
• UTP output extends signal up to 40m for 1080p by CAT-6 cable
• Each Input includes an infrared Emitter, which is used to control the long-distance source device by Remote Control
• Support HDCP
• True Matrix, 4 HDMI sources to 4 UTP displays independently.
• Works with HDMI or DVI-D, HDCP-enabled HDTV
• Simple plug and operation
• Full Metal case
• HDMI certified / ATC tested / RoHS compliant / FCC and CE approved
• 4 HDMI (Type A female) inputs to 4 UTP output  with 4 mirroed HDMI outputs.
• HDMI Connector: type A HDMI 19 pin female
• HDMI input ports: 4  (HDMI female 24K Gold plated ports)
• Allows any HDMI display to view any source at any time
• 3D support
• It is 1RU Rack-mountable
• Enables you to plug the IR receiver cable into the receiver and hide the receiver behind the HDTV
• Locking power connector for both matrix and receiver

What's in the box

• 1X HDMI Matrix 4X4 ove SINGLE CAT6  CHM0404300SCV3
• 4 X Receivers with POC
• 1x DC 12V 2.5A
• 1x Rack-mounting ear set
• 1x Installation software CD
• 1x User Manual

Quick find code: 111286

Model no: HEC35SV3

ClimaxDigital HEC35SV3 4K@30 POC HDMI Extender by CAT-5e/6 uses ONE piece of CAT-5e/6 cable to extend the HDTV display up to 230ft/70m for 1080p resolution, and 131ft/40m for 4K@30 resolution via a single CAT6 cable.I t NEEDS ONLY ONE ETHERNET CABLE. It not only breaks the limitation of the HDMI cable transmission length, but also CAT-5e/6 has more flexibility and convenience in cable construction. It comes with IR function and mounting ears

The HDMI Receiver requires no power as it will receive the power automatically over the same single CAT cable as the audio & video.

Therefore, you no longer need a power supply next to the HDMI Receiver's TV. It is also super slim at only 15mm so can be easily hidden from view, behind a TV.

It has HDMI loop-out for local display.

Features

• ​New 4K@30 POC HDMI Extender by SINGLE  CAT6 CABLE. SUPPORTS 4k@30Hz to 40m, 1080p to 70m 
• HDMI 1.4 and HDCP 1.4 compliant
• Support video resolution up to 4K@30Hz
• Audio formats up to PCM7.1, Dolby True HD, DTS HD
• Recommended cables:
  • CAT6 full copper: 230ft/70m for 1080p, 131ft/40m for 4K@30
  • CAT5E full copper: 197ft/60m for 1080p, 115ft/35m for 4K@30
• Support copying EDID from receiver display or loop out display
• Allow for cascading via additional HDMI loop out port
• PoE / PoC - Receiver requires no power, therefore no bulky power supply needed behind TV
• Super slim - only 15mm thick
• support HDMI  loop-out for local display
• comes with IR function
• comes with mounting ears
• Easy installation
• Only requires 1 CAT5/CAT6 Cable
• Supports HDMI and HDCP
• Follow the standard of IEEE-568B,Auto-adjustment of feedback, equalization and amplify
• Transmitter
• • Input:    1 x HDMI Type A [19-pin female] 
  • Outputs:
    • 1 x HDMI Type A [19-pin female]
    • 1 x IR OUT [3.5mm Stereo Mini-jack]
    • 1 x CAT OUT [RJ45, 8-pin female]
• Receiver
  • Inputs: 
    • 1x IR IN [3.5mm Stereo Mini-jack] 
    • 1x CAT IN [RJ45, 8-pin female]
  • Output:  1x HDMI Type A [19-pin female]

What's in the box

• 1x HEC35SV3 Sender Unit
• 1x HEC35SV3 Receiver Unit
• 1 X 12V 1A UK 3pin power supply
• 1X IR blaster extension cable
• 1X IR receiver extension cable
• User Manual

Quick find code: 111244

Model no: CHM0404SCV3HB

4K/60Hz 4X4 HDMI 2.0 HDBaseT Matrix Switch,18Gbps,POC, HDCP 2.2 YUV 4:4:4,4K*2K 444 to 120m,1080p*60 to 150m

1)Please use EIA/TIA-568-B termination (T568B) at any time
2)Solid Shielded (STP) CAT5E/CAT6/CAT7 cable is recommended for best performance and avoid possible EMI problem.

The premium 4K 60HZ 18Gbps 4x4 HDMI HDBaseT Matrix CHM0404SCV3HB offers you the high quality, high performance and reliable 4 X 4 HDMI True Matrix Switch-splitter by SINGLE UTP CAT6 that allows you to connect 4 HDMI sources to any or any combination of the 4 displays  over inexpensive, standard CAT6 cable. The 4 UTP output program can be from different HDMI sources or from the same HDMI source. Features additional HDMI output per UTP ouput for fexibility or mirroring capabilit, able to handle up to 8 displays.The Matrix technology enables you to route the HDMI input of your choice to the output your choice. For example, you can display SKY HD box on display 1 while PS4 is being showed on display 4. You are also allowed to show SKY HD box on both display 1 and display 4 simultaneously. Any 4 to any 4 matrix switching allows for maximum versatility for integrated systems. The 4K 4X4  HDMI HDBaseT Matrix CHM0404SCV3HB True Matrix HDMI Switcher-Splitter by SINGLE UTP CAT6 eliminates the need to remove and replace the cables between the selected HDMI sources and the desired displays.  Every source is accessible at all times by any display by selecting it with push-in button, IR remote control, RS-232 control, Ethernet control and Web GUI. This device has metal case housing and all HDMI ports are 24K Gold plated. It supports latest version HDMI 2.0, HDCP 2.2, 18Gbps, 4K/60Hz, YUV 4:4:4, CEC, HDR

It supports 4K2K@60Hz 4:4:4 up to 120m (1080p@60HZ up to 150m) over a single cat5e/cat6/cat7 cable. Audio de-embedded to analog and coaxial audio is supported. Each HDMI output supports 4K2K to 1080P downscaler independently.

It has unique intelligent EDID learning function that make it more compatible.Extra infrared receiver extension, IR emitter are supplied for the control. Mounting ears supplied to fix the unit to the wall or hidden place.

4  HDBaseT PoC receivers included 

Key Features

• distributes any of the 4 HDMI inputs to any or any combination of the 4 HDMI output displays.
• The four outputs are all include one HDMI-A output port and one HDBT output port. They can output simultaneously.
• Allows independent viewing of each of the 4 HDMI source devices on 4 display device. The 4 HDMI output program can be different or the same
• HDMI 2.0b, HDCP 2.2 and HDCP 1.x compliant
•  Video resolution up to 4K2K@60Hz (YUV 4:4:4) on all HDMI & HDBaseT ports

• Supported HDTV Resolutions :     Up to 4K2K@50/60Hz (4:4:4)
• Intelligent EDID setting function to make it more compatible
• Simple plug and operation
• Full Metal case
• HDMI input ports: 4  (HDMI female 24K Gold plated ports)
• HDMI output ports: 4  (HDMI female 24K Gold Plated Ports) and 4 HDBASET ports.

Specification

What's in the box

• 1 x CHM0404SCV3HB  4K/60Hz 4X4 HDMI 2.0 HDBaseT Matrix Switch
• 4 x HDBaseT Receiver
• 1 x Matrix IR Remote
• 1 x 100~240V AC 50/60Hz Power cable
• 1 x RS-232 serial cable (1.5 meters, male to female head)
• 4 x 3-pin Phoenix Connector & 4 x 5-pin Phoenix Connector
• 5 x IR Blaster cable (1.5 meters)
• 5 x IR Receiver cable (1.5 meters)
• 10 x Mounting Ear (Matrix and Receiver)
• 1x User Manual

The premium HDMI POC Extender by CAT-5e/6 uses ONE piece of CAT-5e/6 cable to extend the HDTV display up to 50 meters for  3D 1080p using Cat6 cable. It NEEDS ONLY ONE ETHERNET CABLE It not only breaks the limitation of the HDMI cable transmission length, but also CAT-5e/6 has more flexibility and convenience in cable construction. It comes with IR funtion and mounting ears.

The HDMI Receiver requires no power as it will receive the power automatically over the same single CAT cable as the audio & video.

Therefore, you no longer need a power supply next to the HDMI Receiver's TV. It is also super slim at only 15mm so can be easily hidden from view, behind a TV.

It has HDMI loop-out for local display.

Features

• New 1080P HDMI POC Extender by SINGLE CAT5 CAT5e  CAT6 CABLE. SUPPORTS FULL HD 1080P UP TO 50m
• PoE / PoC - Receiver requires no power, therefore no bulky power supply needed behind TV
• Super slim - only 15mm thick! Supports real EDID with DIP Switches
• support HDMI  loop-out for local display
• supports HDMI 3D
• comes with IR function
• comes with mounting ears
• Easy installation
• Only requires 1 CAT5/CAT6 Cable
• Transmission distance can be up to 50 meters for 1080p using SINGLE CAT-6
• Supports HDMI and HDCP
• Perfect for: PS3, PS4, Xbox one, HD DVD, Xbox 360 Elite, Apple TV, Virgin V+, Sky HD, Freesat HD, Blu-ray Disc, DVD, HD Camcorder, HTPC, Laptop
• Follow the standard of IEEE-568B,Auto-adjustment of feedback, equalization and amplify
• HDCP compliant
• Recommended cables: CAT6 full copper = up to 50m 1080p; CAT5e full copper = up to 40m 1080p

What's in the box

• 1x HEC50PRO Sender Unit
• 1x HEC50PRO Receiver Unit
• 1 X 5V UK 3pin power supply
• 1X IR blaster extension cable
• 1X IR receiver extension cable
• User Manual

Quick find code: 111279

Model no: HEC150IPLV2

The  HEC150IPLV2 is equipped with high quality, low-bandwidth H.265  video compression technology  and IP protocol to deliver full HD 1080P video up to 150m/492ft  over single CAT6 cable.

The HEC150IPLV2 can be used to extend HD video to a single display (point-to-point) by connecting the  HEC150IPLV2-TX Transmitter to the HEC150IPLV2-RX Receiver unit.

For multi-display systems connect the Transmitter and multiple Receivers to a Gigabit Ethernet switch and 'mirror' the Source to many Display devices - ideal for Digital Signage, Sports Bars, House of Worship, Education and Hospital applications requiring multiple displays over longer distances using an existing LAN infrastructure. For each additional HD display, one HEC150IPLV2 receiver is needed and can be purchased sepeartely.

The resolution is up to 1920x1200@60Hz YCbCr 4:4:4. HDMI loop output on transmitter enables you to connect extra HDMI TV locally.

Features

• New 1080P HDMI Extender Kit over IP by SINGLE CAT5 CAT5e  CAT6 CABLE. 
• supports FULL HD 1080P UP TO 1150m/492ft over single CAT6
• Follow the standard of IEEE-568B,Auto-adjustment of feedback, equalization and amplify
• use single  Ethernet cable to connect the HDMI source devices (such as HD camera, Blu-ray, Cable Box etc) to HDMI display for longer distances, up to 150M (492ft) using Cat6 cable, 100M (320ft) using Cat 5e cable or 80M (320ft) using Cat5  cable for 1080P
•  HDCP compliant
• support a Point-to-Point connection via CATx
• supports a Point-to-Many connection via a Gigabit Ethernet network switch. Support for multiple transmitters requires a managed Gigabit Ethernet network switch.
• HDMI 1.3 and HDCP 1.4 compliant
• Support 6.75Gbps video bandwidth
• Video resolution is up to 1920×1200@60Hz YCbCr 4:4:4
• Adopt standard H.265 encoding / decoding
• Support 1G standard IP swticher / router / hub
• IR pass through enables you to control HD source device from TV
• supports 640x480@60Hz~1920x1200@60Hz
• Support Audio: LPCM 2.0CH, 32KHz, 44.1KHz, 48KHz
• IR Frequency: 20Hz ~ 60KHz
• Easy installation
• Only requires 1 CAT5/CAT6 Cable
• Supports HDMI and HDCP
• Size: 90mm X 62mm X 17mm

What's in the box

• 1 X HEC150IPLV2 Sender Unit
• 1 X HEC120IPLV2 Receiver Unit
• 2 X 5V UK 3pin 5V 1a power supply
• 1 X IR Blaster cable (1.5 meters)
• 1 X 20~60KHz IR Receiver cable (1.5 meters)
• 1 X User Manual

Quick find code: 111282

Model no: HEB120SV3

The Best solution to transmit both 4K 60HZ HDMI  signal via single UTP CAT5E/CAT6 cable. HEB120SV3 18Gbps HDMI  2.0 HDBaseT super  extender over single cat5e/cat6 enable you to send the 4K 60Hz 4: 4: 4 to 394feet/120m,1080p to  492feet/150m 

It supports HDMI 2.0, HDCP 2.2, 4K 60Hz 4: 4: 4, RS232,Bi-directiona IR,HDR, CEC,POC, local HDMI loop out on sender and  audio seperate output on receiver

Features

• Simple to install
• HDBaseT™  Technology
• Use single UTP LAN cable (CAT-5E/6) to send HDMI signal up to 150m
  • 394ft / 120 meters for 4K2K signal;
  • 492ft / 150 meters for 1080P signal
• UTP cable termination follows the standard of IEEE-568B
• HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
• 18Gbps video bandwidth
• with one HDMI local loop output on the transmitter
• De-embeded audio to analog stereo output on receiver
• bi-directional IR, RS-232 and CEC pass-through
• supports HDR, HDR10+, Dolby Vision and HLG function
• Support PoC (Power over Cable)
• Transfer Bidirectional Infrared control signal together with the HDMI signal
• RS232 control signal transmission
• Mounting ears supplied

What's in the box

• 1x  HEB120SV3 HDBaseT Sender Unit
• 1x  HEB120SV3  HDBaseT Receiver Unit

• 1 X IR Blaster cable (1.5 meters)
• 1 X 20~60KHz IR Receiver cable (1.5 meters)
• 4 X Mounting Ear
• 2 X 3-pin Phoenix connector
• 1 X 24V/1A Locking Power adapter
• 1 X User Manual